Beer Line Cleaning

Wholesaledraft sells a cleaning kit which is inexpensive and easy to use! Part #0256C comes with everything you will need including a faucet brush #0329, faucet wrench #1350, 4 oz. container of beer line cleaner #BLC-4, and Beer line cleaning pump #0256.

1. First remove the orange washer which will be inside the cleaning pump when you receive it. Next mix the beer line cleaner according to the label on the bottle in the plastic jar.
2. Shut off CO2 tank and un-tap barrel.
3. Disconnect beer and air line from coupler.
4. Remove faucet from shank using your faucet wrench and disassemble.
5. Place faucet parts and coupler in bucket to soak.
6. Attach jar cleaner pump fitting to the faucet shank coupling nut, using the orange washer provided, and   pump solution backwards through the beer line into a bucket.
7. Take faucet brush provided and scrub tap and beer faucet parts inside and out. Rinse with fresh water
8. Disconnect jar hose and replace the cleaning solution, that was in the plastic jar, with fresh water and flush through beer line until water comes out clear.
9. Assemble faucet parts and reconnect faucet to shank.
10. Connect beer line and air line to coupler. Re-tap the barrel and turn on the CO2 tank and you're ready to dispense beer.